Thông tin sản phẩm


HL-G103-S-J | Compact Laser Displacement Sensor HL-G1

  • CAD data







  • FAQ

  • Twitter

Compact Laser Displacement Sensor HL-G1

*Photo may vary from actual product.

    • Dimensions

    • Accessories (Option)

    Product Number HL-G103-S-J <!—->
    Part Number HL-G103-S-J
    Product Compact Laser Displacement Sensor
    Details Sensor head (High functionality type)
    Product name

    Compact Laser Displacement Sensor HL-G1

    As of June 28, 2021
    Specifications and design of the products are subject to change without notice for the product improvement.

    Bạn đang xem: HL-G103-S-J

    Spec Detail

    Item Specifications
    Product Number HL-G103-S-J
    Part Number HL-G103-S-J
    Regulatory compliance EMC Directive, RoHS Directive
    Type High functionality type
    Measurement center distance 30 mm 1.181 in
    Measuring range ± 4 mm ± 0.157 in
    Resolution 0.5 μm 0.020 mil
    Linearity ± 0.1 % F.S.
    Temprerature characteristics ± 0.08 % F.S. / ℃
    Light source Red semiconductor laser, Class 2 (IEC / JIS / FDA (Note:This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 50, dated June 24, 2007, issued by CDRH (Center for Devices and Radiological Health) under the FDA (Food and Drug Administration).) , Laser Notice No. 50)
    Max. output: 1 mW (Peak emission wavelength: 655 nm 0.026 mil)
    Beam diameter 0.1 × 0.1 mm 0.004 × 0.004 in
    (Note) This beam diameter is the size at the measurement center distance. These values were defined by using 1/e2 (13.5 %) of the center light intensity. If
    there is a slight leakage of light outside the normal spot diameter and if the periphery surrounding the sensing point has a higher reflectivity than the
    sensing point itself, then the results may be affected.
    Receiving element CMOS image sensor
    Supply voltage 24 V DC ± 10 % including ripple 0.5 V (P-P)
    Current consumption 100 mA or less
    Sampling rate 200 μs, 500 μs, 1 ms, 2 ms
    Analog output : Voltage Output range: 0 to +10.5 V (normal), 11 V (alarm)
    Output impedance: 100 Ohm
    Analog output : Current Output range: 3.2 to 20.8 mA (normal), 21.6 mA (alarm)
    Load impedance: 300 Ω or less
    Outputs (OUT 1, OUT 2, OUT 3) Judgment output or alarm output (Setting can be selected.)
    NPN open-collector transistor / PNP open-collector transistor (selectable)

    -Maximum sink current: 50 mA
    -Applied voltage: 3 to 24 V DC (between output and 0 V)
    -Residual voltage: 2 V or less (at 50 mA of sink current)

    -Maximum source current: 50 mA
    -Residual voltage: 2.8 V or less (at 50 mA of source current)

    Output (OUT 1, OUT 2, OUT 3) : Output operation Opened when the amount of light is insufficient.
    Output (OUT 1, OUT 2, OUT 3) : Short circuit protection Incorporated (automatic restoration)
    Output polarity setting input NPN open collector output operates when 0 V is connected.
    PNP open collector output operates when 24 V DC is connected.
    Timing input NPN output operates when 0V is connected and NPN is set. (It depends on the setting.)
    PNP output operates when external power + is connected and PNP is set. (It depends on the setting.)
    Multi input Zero set, zero set off, reset, memory switching, teaching, saving, and laser control according to the input time.
    In case NPN output is selected, Function varies according to the time 0 V is connected NPN.
    In case PNP output is selected, Function varies according to the time external power + is connected.
    Communications interface RS-422 or RS-485 (selectable)
    Baud rate: 9,600/19,200/38,400/115,200/230,400/460,800/921,600 bps
    Data length 8 bit, Stop bit length 1 bit, Without parity check, BCC check, Termination code: CR
    Indicator : Laser emission Green LED (lights up during laser emission)
    Indicator : Alarm Orange LED lights up when this product cannot measure because of insuffienct or excessive light intensity.
    Indicator : Measurement range Three yellow LED
    Digital display Red LED 5 digit display
    Degree of pollution 2
    Operating altitude 2,000 m 6561 ft or less
    Environmental resistance : Protection IP67
    Environmental resistance : Ambient temperature -10 to +45 ℃ +14 to +113 ℉ (No dew condensation allowed), Storage: -20 to +60 ℃ -4 to +140 ℉
    Environmental resistance : Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH
    Environmental resistance : Ambient illuminance Incandescent light: 3,000 liter x or less at the light-receiving face
    (Note) The fluctuation by ambient illuminance is ± 0.1 % F.S. or less.
    Insulation resistance 20 MOhm , or more, with 250 V DC between all supply teminals connected together and enclosure
    Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure
    Environmental resistance : Vibration resistance 10 to 55 Hz (period: 1 min.) frequency, 1.5 mm 0.059 in double amplitude in X,Y and Z directions for two hours each
    Environmental resistance : Shock resistance 500 m/s2 acceleration (50 G approx.) in X,Y and Z directions three times each
    Material Enclosure: PBT
    Front cover: Acrylic
    Cable: PVC
    Cable 14-core cabtyre cable with connector, 0.5 m 1.640 ft long
    Cable extension Extension up to total 20 m 65.617 ft is possible with optional cable.
    Weight Net weight: 70 g approx. (not including cable), 110 g approx. (including cable)
    Gross weight: 160 g approx.
    Accessory Warning label: 1 set
    Remark Where measurement conditions have not been specified precisely, the conditions used were as follows: supply voltage 24 V DC, ambient temperature +20 ℃ +68 ℉, sampling rate 500 μs, average number of samples: 1024, measurement center distance, object measured is made of white ceramic and analog measurement values.
    • Dimensions

    • Accessories (Option)

    Return to top

    Accessories (Option)


    Product Number


    Part Number HL-G1CCJ10
    Product name Extension Cable


    Product Number


    Part Number HL-G1CCJ2
    Product name Extension Cable


    Product Number


    Part Number HL-G1CCJ20
    Product name Extension Cable


    Product Number


    Part Number HL-G1CCJ5
    Product name Extension Cable





    Return to top

    If you have any questions, please select the option below to contact us or find answers.




    Return to top

    Chuyên mục: Thông tin sản phẩm

    Related Articles

    Trả lời

    Email của bạn sẽ không được hiển thị công khai.

    Back to top button
    444 liveapp 444 live444 live app